|Year : 2015 | Volume
| Issue : 1 | Page : 8-13
Fundamentals of cone beam computed tomography for a prosthodontist
George Puthenpurayil John1, Tatu Elenjickal Joy2, Justin Mathew3, Vinod R. B. Kumar4
1 Department of Prosthodontics, Annoor Dental College and Hospital, Muvattupuzha, Kerala, India
2 Department of Oral Medicine and Radiology, Sree Mookambika Institute of Dental Sciences, Kulasekharam, Kanyakumari, Tamil Nadu, India
3 Department of Oral and Maxillofacial Surgery, Malabar Dental College and Research Centre, Edappal, Kerala, India
4 Department of Oral and Maxillofacial Pathology, Malabar Dental College and Research Centre, Edappal, Kerala, India
|Date of Submission||26-Feb-2015|
|Date of Acceptance||06-Apr-2015|
|Date of Web Publication||14-May-2015|
Prof. George Puthenpurayil John
#8A, B. Paul Abrao Residency, Chittoor Road, Kacheripady, Kochi - 682 018, Kerala
Source of Support: None, Conflict of Interest: None
Cone beam computed tomography (CBCT, also referred to as C-arm computed tomography [CT], cone beam volume CT, or flat panel CT) is a medical imaging technique of X-ray CT where the X-rays are divergent, forming a cone.  CBCT systems have been designed for imaging hard tissues of the maxillofacial region. CBCT is capable of providing sub-millimeter resolution in images of high diagnostic quality, with short scanning times (10-70 s) and radiation dosages reportedly up to 15-100 times lower than those of conventional CT scans. Increasing availability of this technology provides the dental clinician with an imaging modality capable of providing a three-dimensional representation of the maxillofacial skeleton with minimal distortion. The aim of this article is to sensitize the Prosthodontist to CBCT technology, provide an overview of currently available maxillofacial CBCT systems and review the specific application of various CBCT display modes to clinical Prosthodontic practice. A MEDLINE search for relevant articles in this specific area of interest was conducted. The selected articles were critically reviewed and the data acquired were systematically compiled.
Keywords: Artefact reduction, cone beam computed tomography, dose reduction, fundamentals, imaging accuracy, prosthodontics
|How to cite this article:|
John GP, Joy TE, Mathew J, Kumar VR. Fundamentals of cone beam computed tomography for a prosthodontist. J Indian Prosthodont Soc 2015;15:8-13
|How to cite this URL:|
John GP, Joy TE, Mathew J, Kumar VR. Fundamentals of cone beam computed tomography for a prosthodontist. J Indian Prosthodont Soc [serial online] 2015 [cited 2022 Aug 14];15:8-13. Available from: https://www.j-ips.org/text.asp?2015/15/1/8/157001
| Introduction|| |
Radiology is important in the diagnostic assessment of the dental patient and guidelines for its appropriate selection are available. , Cone beam radiographic technology was first introduced in the European market in 1996. In 2013, Tacconi, Mozzo, Godi and Ronca received an award for this revolutionary invention in maxillofacial radiology.
The American Academy of Oral and Maxillofacial Radiology has established "parameters for care," providing the rationale for image selection for diagnosis, treatment planning and follow-up of patients including temporomandibular joint (TMJ) dysfunction (parameter 2), diseases of the jaws (parameter 3) and dental implant planning (parameter 4). ,
| Background|| |
Although combinations of plain X-ray transmission projections and panoramic radiography can be adequate in a number of clinical situations, radiographic assessment may sometimes be facilitated by multiplanar images including computed tomographs (CTs). For most specialty practitioners, the use of advanced CT imaging has been limited by the cost, its availability and radiation dose considerations. However, the introduction of cone beam computed tomography (CBCT) for the maxillofacial region provides a new opportunity to request for multiplanar imaging. Most prosthodontists are familiar with the thin-slice images produced in the axial plane by conventional helical fan beam CTs. CBCT allows the creation of "real-time" images not only in the axial plane but also two-dimensional (2D) images in the coronal, sagittal and even oblique or curved image planes - a process referred to as multiplanar reformatting (MPR). In addition, CBCT data are amenable to reformation in volume, rather than a slice, providing three-dimensional (3D) information. The purpose of this article is to sensitize the prosthodontist to CBCT technology, provide an overview of the unique image display capabilities of currently available maxillofacial CBCT systems and to illustrate the specific application of various CBCT display modes to clinical prosthodontic practice.
| Types of Computed Tomography Scanners|| |
Computed tomography can be divided into two categories based on the acquisition of X-ray beam geometry, namely, fan beam, and cone beam.
Fan Beam Computed Tomography Technology
In fan beam scanners, an X-ray source and solid-state detector are mounted on a rotating gantry [Figure 1]a. Data are acquired using a narrow fan-shaped X-ray beam transmitted through the patient. The patient is imaged slice-by-slice, usually in the axial plane, and interpretation of the images is achieved by stacking the slices to obtain multiple 2D representations. The linear array of detector elements used in conventional helical fan beam CT scanners is actually a multi-detector array. This configuration allows multi-detector CT scanners to acquire up to 64 slices simultaneously, considerably reducing the scanning time compared with single-slice systems and allowing generation of 3D images at substantially lower doses of radiation than single detector fan beam CT arrays. 
|Figure 1: X-ray beam projection scheme comparing single detector array fan-beam computed tomography (a) and cone beam (b) (Courtesy: Scarfe WC, Farman AG (2007) cone beam computed tomography: A paradigm shift for clinical dentistry. Australasian Dental Practice July/August; page number 102)|
Click here to view
Cone Beam Computed Tomography Technology
Cone beam computed tomography scanners are based on volumetric tomography, using a 2D extended digital array providing an area detector. This is combined with a 3D X-ray beam [Figure 1]b. The cone beam technique involves a single 360° scan in which the X-ray source and a reciprocating area detector synchronously move around the patient's head, stabilized with a head holder. At certain degree intervals, single projection images, known as "basis" images are acquired. These are similar to lateral cephalometric radiographic images, each slightly offset from one another. This series of basis projection images is referred to as the projection data. Software programs incorporating sophisticated algorithms including back-filtered projection are applied to these image data to generate a 3D volumetric data set, which can be used to provide primary reconstruction images in three orthogonal planes (axial, sagittal and coronal).
Although the CBCT principle has been in use for almost two decades, only recently with the development of inexpensive X-ray tubes, high-quality detector systems like flat panel detectors (FPDs) and powerful personal computers, have affordable systems become commercially available. Beginning with the initial quantitative radiology (QR) DVT 9000 (QR s.r.l., Verona, Italy)  introduced in April 2001 to NewTom's latest VGi (or 5G) or other systems that include Galileos/Orthophos XG-3D (Sirona Dental company, Germany), CS9000 (Kodak Dental Systems, Carestream Health, Rochester, NY, USA), i-CAT (Xoran Technologies, Ann Arbor, Michigan and Imaging Sciences International, Hatfield, PA) and ProMax 3D max (Planmeca, Finland).
These units can be categorized according to their X-ray detection systems. , Most CBCT units for maxillofacial applications use an image intensifier tube (IIT). A system employing a flat panel imager (FPI) was released by i-CAT. , The FPI-charge coupled device, currently known as FPD, consists of a cesium iodide scintillator applied to a thin film transistor made of amorphous silicon. Images produced with an IIT generally result in more noise than images from an FPD and also need to be preprocessed to reduce geometric distortions inherent in the detector configuration. , Hence, most of the currently available CBCT machinery is made with FPD receptors.
| Advantages of Cone Beam Computed Tomography|| |
Cone beam computed tomography is well suited for imaging the craniofacial area. It provides clear images of highly contrasted structures and is extremely useful for evaluating bone. , Although limitations currently exist in the use of this technology for soft tissue imaging, efforts are being directed toward the development of techniques and software algorithms to improve signal-to-noise ratio and increase contrast.
The use of CBCT technology in clinical practice provides a number of potential advantages for maxillofacial imaging compared with conventional CT, which include:
X-ray beam limitation
Reducing the size of the irradiated area by collimation of the primary X-ray beam to the area of interest minimizes the radiation dose. Most CBCT units can be adjusted to scan small regions for specific diagnostic tasks [Figure 2]. Others are capable of scanning the entire craniofacial complex, when necessary.
|Figure 2: Volume sizes - 5 × 5" (a), 8 × 8" (b), 8 × 10" (c), 15 × 12" (d), 15 × 15" (e) used in cone beam computed tomography imaging|
Click here to view
The volumetric data set comprises a 3D block of smaller cuboid structures, known as voxels, each representing a specific degree of X-ray absorption. The size of these voxels determines the resolution of the image. In conventional CT, the voxels are anisotropic, rectangular cubes where the longest dimension of the voxel is the axial slice thickness and is determined by slice pitch, a function of gantry motion. Although CT voxel surfaces can be as small as 0.625 mm 2 , their depth is usually in the order of 1-2 mm. All CBCT units provide voxel resolutions that are isotropic, that is, equal in all 3D. This produces sub-millimeter resolution (often exceeding the highest grade multi-slice CT) ranging from 0.4 mm to as low as 0.125 mm (Accuitomo; i-Cat; ProMax).
Rapid scan time
Because CBCT acquires all basis images in a single rotation, scan time is rapid (10-70 s) and comparable with that of medical spiral CT systems. Although faster scanning time usually means fewer basis images from which to reconstruct the volumetric data set, motion artifacts due to subject movement are reduced.
Published reports indicate that the effective dose of radiation - average range of 36.9-50.3 millisievert (usv) ,,,, is significantly reduced by up to 98% compared with "conventional" fan beam CT systems (average range for mandible is 1320-3324 usv; average range for maxilla is 1031-1420 usv). ,,,, This reduces the effective patient dose to approximately that of a film-based periapical survey of the dentition (13-100 usv) ,, or 4-15 times that of a single panoramic radiograph (2.9-11 usv). ,,,,
Display modes unique to maxillofacial imaging
Access and interaction with medical CT data are not possible as workstations are required. Though this data can be "converted" and imported into proprietary programs for use of personal computers (e.g. SimPlant, Materialise, Leuven, Belgium), the process is expensive and requires an intermediary stage that can extend the diagnostic phase. Reconstruction of CBCT data is performed natively by a personal computer. In addition, software can be made available to the user, not just the radiologist, either via direct purchase or innovative "per use" license from various vendors (e.g. Imaging Sciences International). This provides the clinician with the opportunity to use chair-side image display, real-time analysis and MPR modes that are task specific. Because the CBCT volumetric data set is isotropic, the entire volume can be reoriented so that the patient's anatomic features are realigned. In addition, cursor driven measurement algorithms allow the clinician to do real-time dimensional assessment [Figure 3]. This very quality allows for the software to incorporate nerve tracking with selected nerve sizes (mandibular canal, incisive canal).
|Figure 3: Representative standard cone beam computed tomography monitor display of Galaxis software (Sirona) showing panoramic image (a), three-dimensional image (b), tangential (c), cross-sectional (d) and axial (e)|
Click here to view
Reduced image artifact
With the manufacturer's artifact suppression algorithms and increasing number of projections, clinical experience has shown that CBCT images can result in a low level of metal artifacts e.g. Metal artifact reduction software (MARS) by Sirona, particularly in secondary reconstructions designed for viewing the teeth and jaws. 
| Application of Cone Beam Computed Tomography Imaging to Clinical Dental Practice|| |
Unlike conventional CT scanners, which are large and expensive to purchase and maintain, CBCT is suited for use in clinical dental practice where cost and dose considerations are important, space is often at a premium and scanning requirements are limited to the head.
All CBCT units initially provide correlated axial, coronal and sagittal perpendicular MPR images. Basic enhancements include zoom or magnification, visual adjustments to narrow the range of displayed grey-scales (window) and contrast level within this window, and the capability to add annotation and cursor-driven measurements. The value of CBCT imaging in implant planning, ,, surgical assessment of pathology, TMJ assessment ,, and pre- and post-operative assessment of craniofacial fractures has been reported. In orthodontics, CBCT imaging is useful in the assessment of growth and development. ,,, Perhaps the greatest practical advantage of CBCT in maxillofacial imaging is the ability it provides to interact with the data and generate images replicating those commonly used in clinical practice. All proprietary software is capable of various real-time advanced image display techniques, easily derived from the volumetric data set.
Cone beam computed tomography display techniques with their specific clinical applications include:
Oblique planar reformation
This technique creates nonaxial 2D images by transecting a set or "stack" of axial images. This mode is particularly useful for evaluating specific structures (e.g. TMJ, impacted third molars, winding angles of the mandibular canal) as certain features may not be readily apparent on perpendicular MPR images.
Curved planar reformation
This is a type of MPR accomplished by aligning the long axis of the imaging plane with a specific anatomic structure. This mode is useful in displaying the dental arch, providing familiar panorama-like thin-slice images (e.g. for implant planning). Images are undistorted, and hence that measurements and angulations made from them have a minimal error.
Serial trans-planar reformation
This technique produces a series of stacked sequential cross-sectional images orthogonal to the oblique or curved planar reformation. Images are usually thin slices (e.g. 1 mm thick) of known separation (e.g. 1 mm apart). Resultant images are useful in the assessment of specific morphologic features such as alveolar bone height and width for implant site assessment, the inferior alveolar canal in relation to impacted mandibular molars, condylar surface and shape in the symptomatic TMJ or evaluation of pathological conditions affecting the jaws.
Multiplanar volume reformation
Any multiplanar image can be "thickened" by increasing the number of adjacent voxels included in the slice. This creates an image that represents a specific volume of the patient. The simplest technique is adding the absorption values of adjacent voxels, to produce a "ray sum" image. This mode can be used to generate simulated panoramic images by increasing the slice thickness of curved planar reformatted images along the dental arch to 25-30 mm, comparable to the in-focus image layer of panoramic radiographs. Alternatively, plain projections images such as lateral cephalometric images can be created from full thickness (130-150 mm) perpendicular MPR images. In this case, such images can be exported and analyzed using third party proprietary cephalometric software. Unlike conventional radiographs, these ray sum images are without magnification and are undistorted. Another thickening technique is a maximum intensity projection (MIP). MIP images are achieved by displaying only the highest voxel value within a particular thickness. This mode produces a "pseudo" 3D structure and is particularly useful in representing the surface morphology of the maxillofacial region. More complicated shaded surface displays and volume rendering algorithms can be applied to the entire thickness of the volumetric dataset to provide 3D reconstruction and presentation of data that can be interactively enhanced.
| Discussion|| |
There is little doubt that cone beam technology will become an important tool in dental and maxillofacial imaging over the next decade or two. Clinical applications of CBCT are rapidly being applied to dental practice. Although CBCT allows images to be displayed in a variety of formats, the interpretation of the volumetric data set, particularly when it comprises large areas, involves more than the generation of 3D representations or application of clinical protocols providing specific images. Interpretation demands an understanding of the spatial relations of bony anatomic elements and extended pathologic knowledge of various maxillofacial structures. The applications in Prosthodontics include TMJ assessment, identifying dystrophic calcifications, seeking out of impacted teeth, implant planning which cannot do without the CBCT, especially with the new MARS and nerve tracking capabilities that it possesses. Integrating the CBCT images with the computer aided design-computer aided manufacturing interface has led to the development of precision fabrication of surgical stents, thereby making giant strides in proper implant placement.
Further, it may help in developing protocols to understand the ideal occlusion and the physiologic rest position in lieu of the multiplanar 3D reformatted images of the teeth and TMJ. Once the software for the soft tissue imaging achieves a better signal-noise ratio, Prosthodontists would have a very strong armamentarium for the comprehensive rehabilitation of patients.
| Conclusion|| |
The development and rapid commercialization of CBCT technology dedicated to imaging the maxillofacial region will undoubtedly increase the Prosthodontist's access to 3D radiographic assessment in clinical practice. CBCT imaging provides the clinician with sub-millimeter spatial resolution images of high diagnostic quality with relatively short scan times (10-70 s) and a reported radiation dose equivalent to that needed for just 4-15 panoramic radiographs.
| References|| |
Scarfe WC, Farman AG, Sukovic P. Clinical applications of cone-beam computed tomography in dental practice. J Can Dent Assoc 2006;72:75-80.
Hatcher DC. Operational principles for cone-beam computed tomography. J Am Dent Assoc 2010;141 Suppl 3:3S-6.
White SC, Heslop EW, Hollender LG, Mosier KM, Ruprecht A, Shrout MK, American Academy of Oral and Maxillofacial Radiology, et al.
Parameters of radiologic care: An official report of the American Academy of Oral and Maxillofacial Radiology. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2001;91:498-511.
Hu H, He HD, Foley WD, Fox SH. Four multidetector-row helical CT: Image quality and volume coverage speed. Radiology 2000;215:55-62.
Mozzo P, Procacci C, Tacconi A, Martini PT, Andreis IA. A new volumetric CT machine for dental imaging based on the cone-beam technique: Preliminary results. Eur Radiol 1998;8:1558-64.
Baba R, Konno Y, Ueda K, Ikeda S. Comparison of flat-panel detector and image-intensifier detector for cone-beam CT. Comput Med Imaging Graph 2002;26:153-8.
Baba R, Ueda K, Okabe M. Using a flat-panel detector in high resolution cone beam CT for dental imaging. Dentomaxillofac Radiol 2004;33:285-90.
Sukovic P, Brooks S, Perez L, Clinthorne NH. DentoCAT - A novel design of a cone beam CT scanner for dento-maxillofacial imaging: Introduction and preliminary results. In: Lemke HU, Vannier MW, Inamura K, Farman AG, Doi K, editors. Computer Assisted Radiology and Surgery. Amsterdam: Elsevier Science; 2001. p. 659-64.
Sukovic P. Cone beam computed tomography in craniofacial imaging. Orthod Craniofac Res 2003;6 Suppl 1:31-6.
Ziegler CM, Woertche R, Brief J, Hassfeld S. Clinical indications for digital volume tomography in oral and maxillofacial surgery. Dentomaxillofac Radiol 2002;31:126-30.
Cohnen M, Kemper J, Möbes O, Pawelzik J, Mödder U. Radiation dose in dental radiology. Eur Radiol 2002;12:634-7.
Schulze D, Heiland M, Thurmann H, Adam G. Radiation exposure during midfacial imaging using 4- and 16-slice computed tomography, cone beam computed tomography systems and conventional radiography. Dentomaxillofac Radiol 2004;33:83-6.
Heiland M, Schulze D, Rother U, Schmelzle R. Postoperative imaging of zygomaticomaxillary complex fractures using digital volume tomography. J Oral Maxillofac Surg 2004;62:1387-91.
Mah JK, Danforth RA, Bumann A, Hatcher D. Radiation absorbed in maxillofacial imaging with a new dental computed tomography device. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2003;96:508-13.
Ludlow JB, Davies-Ludlow LE, Brooks SL. Dosimetry of two extraoral direct digital imaging devices: NewTom cone beam CT and Orthophos Plus DS panoramic unit. Dentomaxillofac Radiol 2003;32:229-34.
Scaf G, Lurie AG, Mosier KM, Kantor ML, Ramsby GR, Freedman ML. Dosimetry and cost of imaging osseointegrated implants with film-based and computed tomography. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 1997;83:41-8.
Dula K, Mini R, van der Stelt PF, Lambrecht JT, Schneeberger P, Buser D. Hypothetical mortality risk associated with spiral computed tomography of the maxilla and mandible. Eur J Oral Sci 1996;104:503-10.
Ngan DC, Kharbanda OP, Geenty JP, Darendeliler MA. Comparison of radiation levels from computed tomography and conventional dental radiographs. Aust Orthod J 2003;19:67-75.
White SC. 1992 assessment of radiation risk from dental radiography. Dentomaxillofac Radiol 1992;21:118-26.
Danforth RA, Clark DE. Effective dose from radiation absorbed during a panoramic examination with a new generation machine. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2000;89:236-43.
Gibbs SJ. Effective dose equivalent and effective dose: Comparison for common projections in oral and maxillofacial radiology. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2000;90:538-45.
Sato S, Arai Y, Shinoda K, Ito K. Clinical application of a new cone-beam computerized tomography system to assess multiple two-dimensional images for the preoperative treatment planning of maxillary implants: Case reports. Quintessence Int 2004;35:525-8.
Kobayashi K, Shimoda S, Nakagawa Y, Yamamoto A. Accuracy in measurement of distance using limited cone-beam computerized tomography. Int J Oral Maxillofac Implants 2004;19:228-31.
Hatcher DC, Dial C, Mayorga C. Cone beam CT for pre-surgical assessment of implant sites. J Calif Dent Assoc 2003;31:825-33.
Honda K, Matumoto K, Kashima M, Takano Y, Kawashima S, Arai Y. Single air contrast arthrography for temporomandibular joint disorder using limited cone beam computed tomography for dental use. Dentomaxillofac Radiol 2004;33:271-3.
Tsiklakis K, Syriopoulos K, Stamatakis HC. Radiographic examination of the temporomandibular joint using cone beam computed tomography. Dentomaxillofac Radiol 2004;33:196-201.
Honda K, Arai Y, Kashima M, Takano Y, Sawada K, Ejima K, et al.
Evaluation of the usefulness of the limited cone-beam CT (3DX) in the assessment of the thickness of the roof of the glenoid fossa of the temporomandibular joint. Dentomaxillofac Radiol 2004;33:391-5.
Aboudara CA, Hatcher D, Nielsen IL, Miller A. A three-dimensional evaluation of the upper airway in adolescents. Orthod Craniofac Res 2003;6 Suppl 1:173-5.
Baumrind S, Carlson S, Beers A, Curry S, Norris K, Boyd RL. Using three-dimensional imaging to assess treatment outcomes in orthodontics: A progress report from the University of the Pacific. Orthod Craniofac Res 2003;6 Suppl 1:132-42.
Maki K, Inou N, Takanishi A, Miller AJ. Computer-assisted simulations in orthodontic diagnosis and the application of a new cone beam X-ray computed tomography. Orthod Craniofac Res 2003;6 Suppl 1:95-101.
[Figure 1], [Figure 2], [Figure 3]
|This article has been cited by|
||Root canal morphology of primary molars – A cone beam computed tomography (CBCT) study
| ||JatinderK Dhillon, Sujoy Ghosh, VijayP Mathur |
| ||Indian Journal of Dental Research. 2022; 33(1): 14 |
|[Pubmed] | [DOI]|
||Use of cone-beam computed tomography for advanced imaging of the equine patient
| ||Holly L. Stewart, Jeffery H. Siewerdsen, Brad B. Nelson, Christopher E. Kawcak |
| ||Equine Veterinary Journal. 2021; 53(5): 872 |
|[Pubmed] | [DOI]|
||Radiographic changes in the temporomandibular joint related to medication in rheumatic diseases
| ||Gamze Sirin, Mehmet Amuk |
| ||Dentomaxillofacial Radiology. 2021; 50(7): 20200557 |
|[Pubmed] | [DOI]|
||Comparing the Diagnostic Accuracy of CBCT Grayscale Values with DXA Values for the Detection of Osteoporosis
| ||Mohammed G. Sghaireen, Kiran Kumar Ganji, Mohammad Khursheed Alam, Kumar Chandan Srivastava, Deepti Shrivastava, Saifulizan Ab Rahman, Santosh R. Patil, Selham Al Habib |
| ||Applied Sciences. 2020; 10(13): 4584 |
|[Pubmed] | [DOI]|