The Journal of Indian Prosthodontic Society

ORIGINAL ARTICLE
Year
: 2018  |  Volume : 18  |  Issue : 4  |  Page : 329--335

Computer-aided design finite element modeling of different approaches to rehabilitate endodontically treated teeth


Gabriela Fernandes da Fonseca, Guilherme Schmitt de Andrade, Amanda Maria de Oliveira Dal Piva, Joao Paulo Mendes Tribst, Alexandre Luiz Souto Borges 
 Dental Materials and Proshodontics, São Paulo State University (Unesp), Institute of Science and Technology, São José dos Campos/SP, Brazil

Correspondence Address:
Dr. Amanda Maria de Oliveira Dal Piva
Av Engenheiro Francisco José Longo, 777, Jardim São Dimas, São José Dos Campos, São Paulo
Brazil

Background: Carious lesions and dental fractures cause weakening in the dental structure. In these situations, endodontic treatment and prosthetic rehabilitation using an intraradicular post are indicated. However, the postspace preparation of the root canal further weakens the dental remnant, especially if there is no ferrule present. This study aimed to evaluate the stress distribution in endodontically treated upper premolars treated with different rehabilitation approaches. Materials and Methods: An endodontically treated first upper premolar was modeled for finite element analysis. Three different approaches were carried out on this model: rehabilitation with fiberglass post (FCP), endocrown (ECW), or buildup. The models were exported in STEP format to the analysis software (ANSYS 17.2, ANSYS Inc., Houston, TX, USA). The solids were considered isotropic, homogeneous, and linearly elastic. A mechanical, structural static analysis was used as the criterion of maximum principal stress to show regions under tensile stress to evaluate the stress distribution in the restoration, cementation line, and root. A load of 400 N (90°) was applied to the lingual triangular ridge. The values of maximum principal stress in MPa were evaluated through colorimetric graphs. Results: Similar stress concentration was observed for all groups. However, the ECW group presented higher values in the restoration/cement interface and root dentin. Conclusions: All the treatment modalities had favorable mechanical behavior to support the masticatory loads; nevertheless, the ECW group presented a higher risk of detachment failure.


How to cite this article:
Fonseca GF, Andrade GS, Dal Piva AM, Tribst JP, Borges AL. Computer-aided design finite element modeling of different approaches to rehabilitate endodontically treated teeth.J Indian Prosthodont Soc 2018;18:329-335


How to cite this URL:
Fonseca GF, Andrade GS, Dal Piva AM, Tribst JP, Borges AL. Computer-aided design finite element modeling of different approaches to rehabilitate endodontically treated teeth. J Indian Prosthodont Soc [serial online] 2018 [cited 2021 Apr 21 ];18:329-335
Available from: https://www.j-ips.org/article.asp?issn=0972-4052;year=2018;volume=18;issue=4;spage=329;epage=335;aulast=Fonseca;type=0